🤔 How can machinery OEMs turn a physics-based digital twin into a practical development environment that works with their existing R&D toolchain?
A digital twin becomes more valuable when it can interact in real time with control-system development tools, physical control hardware, co-simulation environments and third-party sensor models.
🛠️ Mevea Simulation Software provides a real-time, physics-based foundation for connecting these elements and studying complete machines and intelligent subsystems in one simulation environment.
💡 OEMs can begin with generic machine and environment assets, progress to their own detailed models and extend the environment to multiple interacting machines.
🎬 Dr Asko Rouvinen presents the simulation architecture behind this approach in: Mevea Software Solutions Overview
▶️ The presentation is available as part of the Mevea Seminar 2026 Replay.
👇 Register for free on-demand access through the link in the comments.
🤔 How can hybrid powertrain concepts be evaluated under realistic machine loads before building a complete machine prototype?
A hybrid powertrain does not operate in isolation. Its behaviour must be evaluated in relation to the complete machine, its work process and operating environment.
💡 The DITCH project combined a virtual excavator and working environment in Mevea Simulation Software with Simulink-based hybrid systems and a physical JCB diesel engine on an IAAPS dynamometer.
📈 This setup enabled realistic machine loads to support the evaluation of hybrid concepts, control strategies, fuel consumption and emissions before building a complete prototype.
🎬 Professor Sam Akehurst, research director from IAAPS (United Kingdom) presents this approach in: Digital Twin Technologies for Cleaner Off-Highway Machinery (DITCH)
▶️ Want to hear more? The presentation is available as part of the Mevea Seminar 2026 Replay. 😎
Register for free on-demand access through the link in the comments. 👇
🤔 Can engineers trust laboratory testing to reproduce the real loads a full-scale off-road machine experiences in the field? 👉 In Mevea Seminar 2026 Replay, Jukka Säkkinen from Oulu University of Applied Sciences (Finland) presents:
🎬 Comparison of Full-Scale Off-Road Vehicle Machine-in-the-Loop Simulation and Measured Results
🎯 See how Oamk combined Mevea Simulation Software with Nuvelab’s physical test systems to bring real-world machine loads into a controlled laboratory environment. Mevea represented the virtual machine, terrain and duty cycle, while the dynamometers coupled those conditions to the physical drivetrain. The results showed good agreement with field measurements in overall load levels and captured terrain-related variations, showing how the approach can support repeatable testing and earlier, evidence-based engineering decisions.
Also on the programme:
▶️ Electric Snow Groomer Development: From the Concept to the Snow Through Virtual Simulation – Francesco Salis, Prinoth (Italy) ▶️ Digital Twin Technologies for Cleaner Off-Highway Machinery (DITCH) – Professor Sam Akehurst, IAAPS (United Kingdom) ▶️ Mevea Software Solutions Overview – Dr Asko Rouvinen, Mevea (Finland)
Across the programme, the use cases show how physics-based Digital Twins enabled by Mevea Simulation Software help engineering teams study complete machines and intelligent subsystems under realistic operating conditions, compare design alternatives, and build evidence for verification and validation earlier in the R&D process. 💪😎
Register for free on-demand access through the link in the comments. 👇
📌 Follow Mevea for more practical examples of simulation-based machinery development and validation.
🚀 How can you advance the development of a fully electric heavy machine months before the complete physical machine is available? In Mevea Seminar 2026 Replay, Francesco Salis from Prinoth (Italy) presents:
Electric Snow Groomer Development: From the Concept to the Snow Through Virtual Simulation 🎬
See how Prinoth combined Mevea Simulation Software, field data and MATLAB/Simulink to support powertrain dimensioning, control development and the virtual testing of demanding operating scenarios for its fully electric LEITWOLF snow groomer. 💻
Also on the programme:
⚙️ Comparison of Full-Scale Off-Road Vehicle Machine-in-the-Loop Simulation and Measured Results – Jukka Säkkinen, Oamk (Finland) ⚙️ Digital Twin Technologies for Cleaner Off-Highway Machinery (DITCH) – Professor Sam Akehurst, IAAPS (United Kingdom) ⚙️ Mevea Software Solutions Overview – Dr Asko Rouvinen, Mevea (Finland)
Together, these sessions show how Mevea Simulation Software can help engineering teams study complete machines, develop intelligent subsystems and support verification and validation earlier in the R&D process. 📈
Thank you to everyone who joined us for the live seminar and contributed to the Q&A! 👏
Missed the live session or want to revisit the presentations? Register for free on-demand access through the link in the comments. 👇
📌 Follow Mevea for more practical applications of physics-based digital twins in machinery development.
Mevea’s Senior Sales Manager, Steeve Bouaniche, was invited by Forkliftcenter to join their booth at TOC Americas in Cartagena, Colombia, from 20 to 22 October. 🙋
Together, Mevea and the Moviluno, Global Port Equipment and Forkliftcenter teams were kicking their partnerships into higher gear across Latin America. 💪😍🌎
The visit was a real pleasure, and the meetings made the teams even more confident about the future of their collaboration! Until next time 👋
The Wärtsilä Simulation team hosted the Wärtsilä Simulation User Conference 2026 in Manila, the Philippines, on 19 October. 🍸
More than 300 maritime industry leaders from across the Philippines and several neighbouring countries gathered to hear expert presentations and discuss the trends, challenges and opportunities shaping the future of maritime training. 🌏
Mevea joined the event as both a delegate and an exhibitor, representing our role as Wärtsilä’s partner for crane training simulators. 👔
A warm thank you to the entire Wärtsilä Simulation team for an excellently organised event and a valuable opportunity to learn, exchange ideas and connect with industry colleagues. 👏👏😍
👇 Pictured, from top left to bottom right:
📷 Johan Ekvall, Director, Simulation at Wärtsilä Marine, opening the event 📷 Rear Admiral Marco P. Gines of the Philippine Coast Guard, one of the keynote speakers 📷 The Mevea crane training simulator attracting considerable interest 📷 A packed Solaire Resort Grand Ballroom
The best way to get answers to your questions is to contact us using the form below. You can also visit our FAQ page, where we address some of the most frequently asked questions.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Mevea on social media
Mevea on Facebook
🤔 How can machinery OEMs turn a physics-based digital twin into a practical development environment that works with their existing R&D toolchain?
A digital twin becomes more valuable when it can interact in real time with control-system development tools, physical control hardware, co-simulation environments and third-party sensor models.
🛠️ Mevea Simulation Software provides a real-time, physics-based foundation for connecting these elements and studying complete machines and intelligent subsystems in one simulation environment.
💡 OEMs can begin with generic machine and environment assets, progress to their own detailed models and extend the environment to multiple interacting machines.
🎬 Dr Asko Rouvinen presents the simulation architecture behind this approach in:
Mevea Software Solutions Overview
▶️ The presentation is available as part of the Mevea Seminar 2026 Replay.
👇 Register for free on-demand access through the link in the comments.
#DigitalTwin #Simulation #ProductDevelopment ...
🤔 How can hybrid powertrain concepts be evaluated under realistic machine loads before building a complete machine prototype?
A hybrid powertrain does not operate in isolation. Its behaviour must be evaluated in relation to the complete machine, its work process and operating environment.
💡 The DITCH project combined a virtual excavator and working environment in Mevea Simulation Software with Simulink-based hybrid systems and a physical JCB diesel engine on an IAAPS dynamometer.
📈 This setup enabled realistic machine loads to support the evaluation of hybrid concepts, control strategies, fuel consumption and emissions before building a complete prototype.
🎬 Professor Sam Akehurst, research director from IAAPS (United Kingdom) presents this approach in:
Digital Twin Technologies for Cleaner Off-Highway Machinery (DITCH)
▶️ Want to hear more? The presentation is available as part of the Mevea Seminar 2026 Replay. 😎
Register for free on-demand access through the link in the comments. 👇
#DigitalTwin #heavyequipment #offhighwaymachinery #productdevelopment University of Bath ...
🤔 Can engineers trust laboratory testing to reproduce the real loads a full-scale off-road machine experiences in the field? 👉 In Mevea Seminar 2026 Replay, Jukka Säkkinen from Oulu University of Applied Sciences (Finland) presents:
🎬 Comparison of Full-Scale Off-Road Vehicle Machine-in-the-Loop Simulation and Measured Results
🎯 See how Oamk combined Mevea Simulation Software with Nuvelab’s physical test systems to bring real-world machine loads into a controlled laboratory environment. Mevea represented the virtual machine, terrain and duty cycle, while the dynamometers coupled those conditions to the physical drivetrain. The results showed good agreement with field measurements in overall load levels and captured terrain-related variations, showing how the approach can support repeatable testing and earlier, evidence-based engineering decisions.
Also on the programme:
▶️ Electric Snow Groomer Development: From the Concept to the Snow Through Virtual Simulation – Francesco Salis, Prinoth (Italy)
▶️ Digital Twin Technologies for Cleaner Off-Highway Machinery (DITCH) – Professor Sam Akehurst, IAAPS (United Kingdom)
▶️ Mevea Software Solutions Overview – Dr Asko Rouvinen, Mevea (Finland)
Across the programme, the use cases show how physics-based Digital Twins enabled by Mevea Simulation Software help engineering teams study complete machines and intelligent subsystems under realistic operating conditions, compare design alternatives, and build evidence for verification and validation earlier in the R&D process. 💪😎
Register for free on-demand access through the link in the comments. 👇
📌 Follow Mevea for more practical examples of simulation-based machinery development and validation.
#DigitalTwin #MachineInTheLoop #ProductDevelopment Oamk LABs Oamk ...
🚀 How can you advance the development of a fully electric heavy machine months before the complete physical machine is available? In Mevea Seminar 2026 Replay, Francesco Salis from Prinoth (Italy) presents:
Electric Snow Groomer Development: From the Concept to the Snow Through Virtual Simulation 🎬
See how Prinoth combined Mevea Simulation Software, field data and MATLAB/Simulink to support powertrain dimensioning, control development and the virtual testing of demanding operating scenarios for its fully electric LEITWOLF snow groomer. 💻
Also on the programme:
⚙️ Comparison of Full-Scale Off-Road Vehicle Machine-in-the-Loop Simulation and Measured Results – Jukka Säkkinen, Oamk (Finland)
⚙️ Digital Twin Technologies for Cleaner Off-Highway Machinery (DITCH) – Professor Sam Akehurst, IAAPS (United Kingdom)
⚙️ Mevea Software Solutions Overview – Dr Asko Rouvinen, Mevea (Finland)
Together, these sessions show how Mevea Simulation Software can help engineering teams study complete machines, develop intelligent subsystems and support verification and validation earlier in the R&D process. 📈
Thank you to everyone who joined us for the live seminar and contributed to the Q&A! 👏
Missed the live session or want to revisit the presentations? Register for free on-demand access through the link in the comments. 👇
📌 Follow Mevea for more practical applications of physics-based digital twins in machinery development.
#Simulation #DigitalTwin #Electrification #ProductDevelopment Prinoth Snow Groomers ...
Mevea’s Senior Sales Manager, Steeve Bouaniche, was invited by Forkliftcenter to join their booth at TOC Americas in Cartagena, Colombia, from 20 to 22 October. 🙋
Together, Mevea and the Moviluno, Global Port Equipment and Forkliftcenter teams were kicking their partnerships into higher gear across Latin America. 💪😍🌎
The visit was a real pleasure, and the meetings made the teams even more confident about the future of their collaboration!
Until next time 👋
📷 First photo: Steeve with the Moviluno team
📷 Second photo: Steeve with the Global Port Equipment and Forkliftcenter team
#TOCAmericas #TOCAmericas2026 #Ports #ContainerTerminals #PortOperations #TrainingSimulators
Forkliftcenter Global Port Equipment ...
The Wärtsilä Simulation team hosted the Wärtsilä Simulation User Conference 2026 in Manila, the Philippines, on 19 October. 🍸
More than 300 maritime industry leaders from across the Philippines and several neighbouring countries gathered to hear expert presentations and discuss the trends, challenges and opportunities shaping the future of maritime training. 🌏
Mevea joined the event as both a delegate and an exhibitor, representing our role as Wärtsilä’s partner for crane training simulators. 👔
A warm thank you to the entire Wärtsilä Simulation team for an excellently organised event and a valuable opportunity to learn, exchange ideas and connect with industry colleagues. 👏👏😍
👇 Pictured, from top left to bottom right:
📷 Johan Ekvall, Director, Simulation at Wärtsilä Marine, opening the event
📷 Rear Admiral Marco P. Gines of the Philippine Coast Guard, one of the keynote speakers
📷 The Mevea crane training simulator attracting considerable interest
📷 A packed Solaire Resort Grand Ballroom
#Simulation #WartsilaSimulation #SIMUCManila2026 #MaritimeTraining Wartsila ...
Frequently Asked Questions?